Electric cable pipe support

Power pipe cradle, where a single block of the cradle consists of cradle corners, cradle edges, cradle plates, cradle ribs, inner joining edges of the single block, pins, pin holes, cable pipe hole edges, and cable pipe holes. It is divided into an upper and lower part, which are assembled by inserting pins into the pin holes. Reinforcing bar holes, used for placing and/or threading reinforcing bars, are set at selected locations on the single block of the cradle, defined by the edges of the reinforcing bar holes. Two or more single blocks of the cradle can be arranged vertically and/or horizontally and joined by inserting pins into the pin holes. This technical solution is simple and practical, with significant social and economic benefits. It not only allows for the placement and/or threading of reinforcing bars, enhancing the connectivity of the cable pipe foundation encapsulation on both sides of the cradle, ensuring the quality of buried cable and cable pipe engineering, and facilitating the construction of buried cable and cable pipes, but also standardizes cradle products, advances the technology of buried cable and cable pipe engineering, and saves materials for producing cradle products and labor for drilling reinforcing bar holes in the cradles.

Applicable pipe types: Fiberglass reinforced plastic pipes, power pipes, PE pipes, plastic-coated steel pipes, drainage pipes, water supply pipes, corrugated pipes...

Usage method: Two modules are placed opposite each other and assembled into shape, connected by pins.

Product features: High flexibility, easy installation, excellent product performance, aging resistance, long service life.

Connection method: Pins.